SVR-PRO 200 SNW SATA III

Kód: SVR-PRO 200 xxx

[+] zvětšit

2,5" SSD

Žádné hodnocení.

Doporučit Přihlaste se pro přístup do seznamu přání.

SVR-PRO 200 SNW SATA III

SVR-PRO 200 SMW 2.5" SSD (SATA MIXED WORKLOAD)

The SVR-PRO 200 SMW SSD range is designed for mixed workload applications, offers up to a massive 6.4TB of data storage and features superior endurance (up to 11,680 TBW) for a SATA SSD complimented by consistently low latency and a high level of read and write IOPS.
Delivers solid I/O cost-to-performance benefits for applications that demand low latency read speeds and greater bandwidth for server and storage environments for Serial Advanced Technology Attachment (SATA)-based systems in capacities of 100GB, 200GB, 400GB, 800GB, 3.2TB and 6.4TB.
Uses a single-chip controller with a SATA interface on the system side and 8-channels of Flash internally. The industry-standard 2.5-inch form factor enables interchangeability with existing hard disk drives (HDDs) and native SATA HDD drop-in replacement with the enhanced performance, reliability, ruggedness, and power savings offered by an SSD.
SVR-PRO 200 has the capacity you require for high-performance computing with exceptional reliability for storage-hungry, critical SATA based systems.

Benefits

Highest endurance SATA SSD
High capacity SSD for big data storage (3.2TB and 6.4TB)
Designed for mixed workloads
Reduced latencies
Lower Power Consumption
Non-volatile Flash Memory for outstanding data retention - Less likely to fail than HDD
Shock resistance - No moving parts enable the product to be used in tougher conditions
Silent operation - Noiseless and low heat dissipation
Much less heat generated than conventional HDD

Features
Exceptional TBW performance - Up to 11,680 (6.4TB model)
2.5" form factor with SATA III 6Gbps interface (backwards compatible with SATA 3Gbps and SATA 1.5Gbps)
Sequential Read up to 551MB/s and Write up 518MB/s
Random Read IOPS up to 80K, Random Write up to 70K
Supports S.M.A.R.T. - Self-Monitoring, Analysis and Reporting Technology Features an internal temperature sensor with an accuracy of +/-2°C over a range of -40°C to +125°C which can be monitored using a SMART attribute BEh
The SSD hardware is built with a number of capacitors that ensure that the data in the write cache of the SSD is protected against corruption if a power loss was to occur, enabling the SSD to complete the last write command to the NAND flash.CE and FCC compliant

5 Year Warranty or maximum edurance use.

Štítky

ssd,svr ssd pro 2,5"